ln the roller-type quenching production line, many rollers turning laterally are fixed at the bottom of the through hearth. The rollers carry the work pieces and make them move along the roll table. The work pieces move towards and have no fixed point contacting with the rollers, so they can be heated uniformly and have no bruising and less deformation during heat treatment. Further more, the rollers are always in the inside of the furnace, which reduces the energy consumption, helps to get high heat efficiency. This production line is suitable for the heat treatment of medium to large-sized bearing rings, also can be used for carburizing heat treatment.
Main technical Parameters of the Roller-type Automatic Quench Tempering production Line
Note: 1. For work pieces of a diameter larger than 110mm, the roller-type quenching furnace and mesh-belt quenching tank, cleaning machine and tempering furnace can be applied.
2. The specifications of the equipments can be customized.
3. The configuration of the production line can be changed reasonably according to the requirements of customers.
Copyright © 2015-2020 Zhejiang Anji AIT Equipment Co., Ltd. All rights reserved. Add:Zhejiang province, Anji County, Meixi Town
Tel:+86-572-5502078 5718215 E-mail:firstname.lastname@example.org
Support By: Ajol.Cn